Madison Chemical - Coating Products Technical Data Sheets

Technical Data Sheets for Madison's Products

Specification documents requires the free Adobe Acrobat Reader plug-in for your Web browser. If you don't have Adobe Acrobat Reader software installed, click here for the free download for Windows, Mac and Linux operating systems.

These documents should be regarded as GUIDELINES only, and are subject to periodic review. Before using or relying upon the information contained therein, please consult a Madison representative.

Products by Application

Tank Coatings
Pipe Coatings
Infrastructural/OEM Coatings
Maintenance
Marine
Ancillary Products

Coating for Galvanized Structures

Click product names in the charts below to jump to password-protected Technical Data Sheets for these products.

Tank	Above Ground	Below Ground
Exterior	AcrylaThane 55 AcrylaThane 85 AcrylaThane 5200 CorroCote Plus TufSheen Precatalyzed TufSheen II FibreThane Plus FusionClad Primer (Water Dispersible, No blasting required) FusionClad TC (Water Dispersible, No blasting required) FusionClad TC Ultra (Water Dispersible, No blasting required)	CorroCote II Classic CorroCote 'S' CorroCote II HydroThane CorroPipe II WasteLiner
Interior	CorroCote II PW CorroCote II UltraLiner CorroCote II Classic CorroCote Plus CorroCote 'S' Flexcel II Flexcel II Precatalyzed FibreThane Plus FibreThane CorroCote II HydroThane
Ancillary	CorroPrime CorroZinc AlumiZinc 2000 AlumiZinc 'S' EC 120 MG 120 MG 125 MG 201 MG 220 (See Touch-Up, Reducers and Catalysts bottom of page)

^ Page Top

Pipe	Above Ground	Below Ground
Exterior	PolySheen CorroPipe II Omni	CorroPipe 2000 CorroPipe 3000 CorroPipe II TX-15 CorroPipe II Omni CorroPipe 'S'
Interior	CorroPipe II PW CorroPipe II UltraLiner CorroPipe II Omni CorroPipe II WasteLiner CorroPipe 'S'
Joints	CorroPipe 'S' EC 120 CorroPipe II Joint Coating (E) CP II Joint Encapsulant MG 125
Ancillary	AlumiZinc 2000 AlumiZinc 'S' CorroZinc CorroPrime (See Touch-Up, Reducers and Catalysts bottom of page)

^ Page Top

Infrastructural / OEM
General	CorroCote II Classic CorroCote Plus CorroCote II PW CorroCote II UltraLiner CorroCote Precatalyzed CorroCote 'S' Flexcel II Flexcel II Precatalyzed TufSheen II TufSheen Precatalyzed AcrylaThane MG 120 MG 125 GemThane Products
Power Poles / Towers	CorroCote II Classic PoleClad 100 AcrylaThane 5200 TufSheen II TufSheen Precatalyzed
Food / Water Structures	CorroCote II PW CorroPipe II PW EC 120 Flexcel II
Ancillary	MG 201 MG 220 CorroZinc CorroPrime AlumiZinc 2000 AlumiZinc 'S' (See Touch-Up, Reducers and Catalysts bottom of page)

^ Page Top

Maintenance	Mix-and-Apply	Precatalyzed
Primers	GemThane Aluminized Primer GemThane Zinc-Rich Primer GemThane UltraPrime
Interior	GemThane 'S' GemThane AquaTech GemThane AquaTech STC GemThane Water-based Epoxy	GemThane Precatalyzed Aromatic GemThane Sealer
Exterior	GemThane 1:4 Aliphatic GemThane AquaTech	GemThane Precatalyzed Aliphatic GemThane Flexcel Precatalyzed GemThane Sealer
Ancillary	(See Touch-Up, Reducers and Catalysts bottom of page)

^ Page Top

Marine
Products	MariThane II UltraLiner MariThane 1:4 Aliphatic MariThane II Aliphatic MariThane II Multi MariThane II PW

^ Page Top

Ancillary Productsby Application

Touch-Ups, Reducers and Catalysts for a Range of Applications
Touch-Ups product names at right link to individual product summary pages.	Parent Material Aliphatic 1:4 Touch-Up Flex II Touch-Up GP II Touch-Up GP II (E) Touch-Up TX Touch-Up TX II Touch-Up
Reducers Please contact us for details on these products.	VR-1, spray grade VR-2, brush grade VR-3, spray grade VR-4, spray grade Description: To 'thin' solvent-dispersible products as required. Handling: Add to mix-and-apply and precatalyzed products to enhance sprayability. Performance: Makes it easier to achieve smooth, pinhole-free film. End Use: Use with any product that is applied by single-component means. Also suitable for clean-up of equipment. Please contact us for details on Madison's Reducer products.
Catalysts at 70°F/20°C Please contact us for details on these products.	C-4 (20-45 min pot life) C-7 (45-90 min pot life) C-10 (1.5-2.0 hr pot life) C-13 (for accelerating cure of Flexcel PC) C-16 (for accelerating cure of TufSheen PC & CorroCote PC) Description: C-4, C-7 and C-10 catalysts are required in "S" systems. C-13 catalyst is optional in Flexcel PC and C-16 catalyst can be used to accelerate the cure of TufSheen PC and CorroCote PC. Handling: Mix into above products as required. Performance: Speeds cure, provides even cure, reduces surface curing at thicker film builds. End Use: As specified or recommended Please contact us for details on Madison's Catalyst products.

GalvaClad
Products	GalvClad Liquid Zinc (High Performance, No blasting required) GalvaClad Aromatic (High Performance, No blasting required) GalvaClad Aliphatic (High Performance, No blasting required)

Other links in our Technical Section:
Product Specifications Section (password required).
Application Instructions (password required).
Equipment Summary.
Technical Papers in PDF Format.
Summary of Third-Party Test Results.
Summary of Approvals for Madison's Products.
Madison's Coatings FAQs.
Material Safety Data Sheets (MSDS) Notes.
Back to main Tech Corner Page.

Can't find the specification information you're looking for? Contact us for expert assistance and troubleshooting!

^ Page Top

Copyright © 2005 Madison Chemical Industries, Inc. All rights reserved. AcrylaThane™, AlumiZinc™, CorroClad™, CorroCote™, CorroPipe™, CorroPrime™, CorroZinc™, FibreThane™, Flexcel™, GemThane™, GemThane AquaTech™, GemThane AquaTech STC™, HydroThane™, MariThane™, Maxxam™, PilingPro™, PoleClad™, PolySheen™, TufSheen™, UltraLiner™ and UltraPrime™ are trademarks of Madison Chemical Industries, Inc. We are an ISO 9001:2000 registered company.