Click here for a
closer look at the technical aspects of our
coatings. |
|
|
 |
 |
 |
 GemThane 1:4 Aliphatic
Acrylic Aliphatic Exterior Coating System
GemThane 1:4
Aliphatic is a protective coating formulated to offer the best
long-term protection against the elements and against physical
damage in almost any commercial/industrial environment. It has a
mix-and-apply format (1:4 ratio) which means means plural component
performance combined with paint-like application characteristics.
GemThane 1:4
Aliphatic provides excellent gloss retention and color fastness. The
cured film offers resilience, chemical resistance and a glossy
appearance that can be restored by simple washing. It is resistant
to aqueous solutions including salt water and diluted acid and will
withstand intermittent exposure to concentrated chemicals.
Typical Applications:
•
Architectural finishing of concrete or steel
• Graffiti prone surfaces
• Machinery, equipment, metal siding and roofs |
Application
Summary:
GemThane 1:4 Aliphatic can be applied without
primer in two coats, a fog/stripe coat of 2 - 3 wet mils and a
full coat of about 5 - 6 wet mils. It can be used in one coat
over top of any of Madison's Aromatic (lower cost but not color
fast) systems. Recoating should be done within 24 hours for the
best adhesion.View the
GemThane 1:4 Aliphatic Application Instructions for
additional application information. |
Technical
Data:
Please view our printable
GemThane 1:4 Aliphatic PDF Product Data Sheet for
detailed technical information. |
| All statements, technical information and recommendations
contained herein are typical of results obtained under laboratory conditions
and are not intended to be used as contract specifications. For
specification guidelines please
contact Madison Chemical Industries, Inc. |
|
^ Page Top<
All Products
|
|
| |
Copyright © 2005
Madison Chemical Industries, Inc. All rights reserved.
AcrylaThane™, AlumiZinc™, CorroClad™, CorroCote™, CorroPipe™,
CorroPrime™, CorroZinc™, FibreThane™, Flexcel™, GemThane™, GemThane
AquaTech™, GemThane AquaTech STC™, HydroThane™, MariThane™, Maxxam™,
PilingPro™, PoleClad™, PolySheen™, TufSheen™, UltraLiner™ and
UltraPrime™ are trademarks of Madison Chemical Industries, Inc. We
are an ISO 9001:2000 registered company.
|
|
|
|
|
Click here to
learn about our dedication to quality. |
|
|
