Click here for a
closer look at the technical aspects of our
coatings. |
|
|
 |
 |
 |
 CorroPipe
II
WasteLiner
Protective
Lining for Effluent Pipelines
A
two-component polyurethane coating specially formulated for use as
an economical protective lining for pipelines carrying aqueous
effluent and non-potable water. The cured coating has the appearance
of a sheet of plastic fusion bonded to the substrate.
CorroPipe II
WasteLiner offers the specifier and end-user many years of total
protection against the harsh conditions found in sewer, waste or
effluent line. This product offers many advantages: near-zero
VOCs, non-flammable, high build, no primer required, one coat, no
amines or styrenes, no isocyanate monomers, no coal tar, and rapid
cure, even at sub-freezing temperatures. Typically, CorroPipe II
WasteLiner is applied using a two-component airless spray gun.
The finished product is extremely hydrophobic and
bonds tenaciously to steel pipe. Attractive pricing and high
throughput make the economics of this system extremely inviting.
Typical Applications:
•
Effluent pipelines
•
Wet wells
• Wastewater treatment
structures |
Application Summary:
CorroPipe II WasteLiner features a broad
application temperature range of -40°C (-40°F) to 65°C
(150°F). Initial setting time at a typical temperature of
20°C/70°F is typically 15 minutes. The products features an
adhesion to steel and ductile iron of greater than 2,000 p.s.i.,
and exceeds the cohesive strength of concrete.View the
Short Form Application Instructions for
additional application information. |
Approvals and Listings:
Info to come. |
Technical
Data:
Please
view our printable
CorroPipe
II WasteLiner Technical Data Sheet for detailed technical information. |
Related Products:
For solvent immersion or continuous temperatures
above 60°C (140°F), use CorroPipe II UltraLiner, and for drinking
water, specify CorroPipe II PW. |
Alternate Products:
CorroPipe II WasteLiner (CM) is a
ceramic-modified version of CorroPipe II WasteLiner that offers
high abrasion resistance – ideal for highly abrasive or
high-flow applications.
CorroPipe II WasteLiner (AM) is a modified version of CorroPipe II
WasteLiner that contains an EPA-registered anti-microbial agent.
Although the standard formulation is not susceptible to
bacterial attack, CorroPipe II WasteLiner (AM) provides extended
service life in sewer environments. |
| All statements, technical information and recommendations
contained herein are typical of results obtained under laboratory conditions
and are not intended to be used as contract specifications. For
specification guidelines please
contact Madison Chemical Industries, Inc. |
|
^ Page Top<
All Products
|
|
| |
Copyright © 2005
Madison Chemical Industries, Inc. All rights reserved.
AcrylaThane™, AlumiZinc™, CorroClad™, CorroCote™, CorroPipe™,
CorroPrime™, CorroZinc™, FibreThane™, Flexcel™, GemThane™, GemThane
AquaTech™, GemThane AquaTech STC™, HydroThane™, MariThane™, Maxxam™,
PilingPro™, PoleClad™, PolySheen™, TufSheen™, UltraLiner™ and
UltraPrime™ are trademarks of Madison Chemical Industries, Inc. We
are an ISO 9001:2000 registered company.
|
|
|
|
|
Click here to
learn about our dedication to quality. |
|
|
