Click here for a
closer look at the technical aspects of our
coatings. |
|
|
 |
 |
 |
CorroPipe
II
Joint Coating (E)
Pipe
Joint Coating System
CorroPipe II Joint
Coating (E) is a 100% solids (no VOC), NSF approved
polyurethane-epoxy hybrid coating system. This product offers
corrosion protection for both the interior and exterior surfaces of
field welded steel pipeline joints, and the mixing ratio is 2:1.
CorroPipe II
Joint Coating (E) combines the superior chemical resistance and
moisture tolerance of a Bisphenol F type epoxy coating with the high
adhesion, impact and abrasion resistance of a rigid polyurethane
coating. This product is well-suited to humidity and field
applications.
Typical Applications:
• Pipe
joints
• Industrial water and wastewater repairs |
Application Summary:
CorroPipe II Joint Coating (E) is packaged in
separate containers with an "A" component and a "B" component.
The components are to be mixed in a 2:1 ratio. This coating
material is to be applied using a brush, trowel or airless
spiral equipment. If more than one coat is necessary, additional
coats should be applied within 48 hours.
View the
CorroPipe II Joint Coating E Application Instructions for
additional application information. |
Approvals and Listings:
• NSF International:
ANSI/NSF Standard 61 for use in potable water applications |
Technical
Data:
Please view our printable
CorroPipe II Joint Coating (E) PDF Product Data Sheet
for detailed technical information. |
Related Products:
CorroPipe II UltraLiner, CorroPipe II,
EC 120,
CorroPipe 'S' |
| All statements, technical information and recommendations
contained herein are typical of results obtained under laboratory conditions
and are not intended to be used as contract specifications. For
specification guidelines please
contact Madison Chemical Industries, Inc. |
|
^ Page Top<
All Products
|
|
| |
Copyright © 2005
Madison Chemical Industries, Inc. All rights reserved.
AcrylaThane™, AlumiZinc™, CorroClad™, CorroCote™, CorroPipe™,
CorroPrime™, CorroZinc™, FibreThane™, Flexcel™, GemThane™, GemThane
AquaTech™, GemThane AquaTech STC™, HydroThane™, MariThane™, Maxxam™,
PilingPro™, PoleClad™, PolySheen™, TufSheen™, UltraLiner™ and
UltraPrime™ are trademarks of Madison Chemical Industries, Inc. We
are an ISO 9001:2000 registered company.
|
|
|
|
|
Click here to
learn about our dedication to quality. |
|
|
