

Click here for a
closer look at the technical aspects of our
coatings. |
|

|
 |
 |
 |
 
FusionClad® TC Ultra
“EASY-PREP”
WATERBORNE INDUSTRIAL PROTECTIVE COATING
FusionClad TC Ultra, our toughest water-dispersible coating, is
paint-like to use. It is a “Mix-and-Apply” polyurethane topcoat
with very little odor and very low VOCs (volatile organic
compounds). Its quick curing cycle means that coated parts can be
handled and shipped quickly. Apply by brush, roller or spray. It
cures to a semi-gloss, enamel-like finish. FusionClad TC Ultra can
be used on virtually any substrate. On steel and other metals, the
applicator can avoid the expense of elaborate surface preparation by
conditioning the surface with FerroGrip Surface Conditioner /
Adhesion Promoter and applying FusionClad Primer before applying
FusionClad TC Ultra.
The combination of FerroGrip and FusionClad TC Ultra also works well
on concrete, where the use of FerroGrip eliminates the need for acid
etching and abrasive blasting.
NOTE: For less demanding applications and for ease of use, consider
using
the sister coating, FusionClad TC, a single component acrylic-based
product
|
Typical Applications:
The FusionClad
system is suitable for protecting virtually any steel
structure targeted for, or currently used in, atmospheric
(i.e., aboveground) exposure. Use in the shop or in the
field for coating steel structures, equipment, sheet metal,
piping, furniture and storage tanks. FusionClad TC Ultra is
also ideal for concrete walls and floors and most other
substrates such as vinyl and other plastics, wood and
drywall. An anti-microbial version is available by special
order.
|
|
Application Summary:
Water dispersible advanced acrylic technology
Fast dry allows easy handling and early application of
topcoats
Provides over 1000 psi bond strength to steel with minimal
surface preparation
Low VOCs (minimal solvents) and low odor
Clean up with soap and water
Easy paint-like application by airless spray, roller or
brush
|
|
Technical Data:
Please view our printable
FUSIONCLAD TC ULTRA Product Profile
for a summary of features and benefits or our
Technical Data Sheet
for technical specifications and a summary of application
instructions.
|
|
Click
here to go back to Section Introduction, “Metal
Coatings”.
|
| All statements, technical information and recommendations
contained herein are typical of results obtained under laboratory conditions
and are not intended to be used as contract specifications. For
specification guidelines please
contact Madison Chemical Industries, Inc. |
|
^ Page Top <
All Products

|
 |
| |

Copyright © 2008
Madison Chemical Industries, Inc. All rights reserved. AcrylaThane®, AlumiZinc®, CorroClad®, CorroCote®, CorroPipe®, CorroPrime®, CorroZinc®, FibreThane®, Flexcel®, GemThane®, GemThane AquaTech®, GemThane AquaTech STC®, HydroThane™, MariThane®, Maxxam™, PilingPro®, PoleClad®, PolySheen™, TufSheen®, UltraLiner™, UltraPrime™,
Gemthane®
,FussionClad™, GalvaClad™, NanoSheild™, PrepCrete™, FerroGrip™,
GalvaGrip™ and Madison AP-50 Adhesion Promoter™ are trademarks of Madison Chemical Industries, Inc. We
are an ISO 9001:2000 registered company.

|
|
 |
|



Click here to
learn about our dedication to quality. |
|

|