CorroPipe II Omni
Surface Tolerant General Purpose Pipeline Coating & Lining System
Similar in composition to CorroPipe II TX-15, CorroPipe II Omni (or simply “Omni” for short) is modified with a special proprietary Adhesion Promoter – Madison AP-50 – in order to achieve greater adhesion at any level of surface preparation. Generally speaking, Omni will achieve 50% higher adhesion than other coating systems, making it the perfect choice where the surface preparation is less than ideal. This solvent-free pure resin system is applied with 1:1 application equipment and will set at virtually any ambient temperature in a matter of minutes. The hard, resilient film is ideal for most types of immersion or embedded service, on both the interior and exterior of pipe. A variety of colors is available.
NEW:A slow setting version of CorroPipe II Omni is now available for Mix-and-Apply paint-like application.
NEW:CorroPipe II Omni now includes Madison AP-50 Adhesion Promoter as a standard ingredient.
Any kind of substrate (Steel, Ductile Iron or Concrete Pipe) where it is not feasible to achieve optimal surface preparation or where the user or specifier simply wants to optimize performance characteristics such as adhesion, resistance to undercutting and damage resistance.
CorroPipe II Omni can be spray-applied at any ambient temperature, in a single multi-pass coat, to any desired thickness. This fast and trouble-free application improves productivity and increases throughput. Having zero VOC's, this coating is also excellent for areas with strict regulations.
For general purpose use, consider CorroPipe II TX-15. For hostile environments, use CorroPipe 3000. For potable water, use CorroPipe II PW (original or CorroCote II PW Ultra). For extra abrasion resistance and elongation (e.g. ability to span hairline cracks on concrete pipe), use CorroPipe II Liquid Rubber.
CorroPipe II Omni (AM) is a modified version of this product that contains MicroSpear, an EPA-registered anti-microbial agent. While the coating itself is naturally resistant to bacterial attack, MicroSpear resists the growth of microbial colonization on the surface of the coating (a health concern in many applications) and minimizes the risk of MIC (Microbially Induced Corrosion).
CorroPipe II Omni (CM) is a version of this product containing NanoShield, an additive consisting of microscopic spheres of real ceramic that enhance the abrasion and impact resistance of the finished product without detracting from other physical properties.
CorroPipe II Omni can be ordered with both AM and CM, if so desired.